LaQ07 Framed - Mounting Instructions
GB
3
© Schletter GmbH
•
Gewerbegebiet an der B15
•
Alustraße 1
•
83527 Kirchdorf/Haag i. OB
•
Germany
•
Tel.: +49 8072 9191-200
Fax: +49 8072 9191-9200
•
E-mail: [email protected]
•
www.schletter.eu
•
Updated 08/2012
•
Subject to change without notice
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: [email protected]
p
Mount module-bearing profile
t
Feed square-head screws M10x25 into
the lower bearing profile and through
the slotted holes of the fasteners.
t
Secure with flange nuts M10.
q
Extend module-bearing profile
t
Position next pro
fi
le.
t
Mount splice E from below.
t
Tighten SW6 screws
(pre-assembled)
Please ensure that sufficient space is
left at profile joints for the splice.
