LaQ07 Framed - Mounting Instructions
GB
4
© Schletter GmbH
•
Gewerbegebiet an der B15
•
Alustraße 1
•
83527 Kirchdorf/Haag i. OB
•
Germany
•
Tel.: +49 8072 9191-200
Fax: +49 8072 9191-9200
•
E-mail: [email protected]
•
www.schletter.eu
•
Updated 08/2012
•
Subject to change without notice
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: [email protected]
For further information relating to our systems, please refer to our website:
www.schletter.eu
under Downloads in the Solar section.
r
Position bearing plate
t
Place bearing plate in required
fastening position.
s
Module mounting
t
Position
fi
rst module to the end of pro
fi
le
t
Secure module with end- and mid-
dle clamps which are bolted to the
module-bearing pro
fi
le through the
respective bearing plates.
t
Fasten module with two end clamps -
in our example: Click in the Rapid end
clamps and tighten the 6-Lobe screws
(T40).
t
Connect the corresponding module
cables
t
Position further modules and secure
each between the modules with two
middle clamps.
t
Secure the last module of a row with
two end clamps.
© Schletter GmbH, 2012, I400239GB, V1
