EN
4
© Schletter GmbH
•
Gewerbegebiet an der B15
•
Alustraße 1
•
83527 Kirchdorf/Haag i. OB
•
Germany
•
Tel.: +49 8072 9191-200
Fax: +49 8072 9191-9200
•
E-mail: [email protected]
•
www.schletter.eu
•
Updated 08/2012
•
Subject to change without notice
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: [email protected]
FixZ-7 Mounting Instructions
For further information relating to our systems, please visit our website:
www.schletter.eu
under Downloads in the Solar section.
r
Module mounting
t
Position the first module flush with the
end of the rail then observe the inden-
tation distance
d
(c.f. Autokalkulator
schematic diagram and information
issued by the manufacturer)
t
Fasten module with two end clamps - in
our example: click in the Rapid end clamps
and tighten the 6-Lobe screws (T40).
t
Connect module cables accordingly.
t
Position further modules and secure
each between the modules with 2
middle clamps.
t
Secure the last module of a row with
2 end clamps.
d
© Schletter GmbH, 2012, I400178GB, V2
