EN
1
© Schletter GmbH
•
Gewerbegebiet an der B15
•
Alustraße 1
•
83527 Kirchdorf/Haag i. OB
•
Germany
•
Tel.: +49 8072 9191-200
Fax: +49 8072 9191-9200
•
E-mail: [email protected]
•
www.schletter.eu
•
Updated 01/2015
•
Subject to change without notice
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: [email protected]
FixZ-15 Mounting Instructions
Safety precautions
FixZ-15
Mounting Instructions
Upper system rail
End clamp
Middle clamp
Lower system rail
Planning, mounting and start-up of the solar plant must be performed by quali
fi
ed personnel only. Improper execution can result
in damage to the plant and to the building and can present a risk to people.
Risk of falling! There is a risk of falling when working on the roof as well as when ascending and descending the building. Accident
prevention regulations must be observed and appropriate safety equipment must be used.
Risk of injury! Objects falling from the roof can cause injury to people. The danger area around the installation site must be blocked
o
ff
and persons in the vicinity must be warned of the risks.
Required tools
Screwdriver with bits and socket wrench
Bit T40
Bit hex-head 6-spanner
Socket wrench 8-spanner
Corresponding tools
for the selected fasteners
The Schletter tool kit
comprises tools required for
all standard systems.
Risk of breakage! PV modules can be damaged if stepped upon.
Risk of electric shock! The mounting and maintenance of the PV modules must be carried out by quali
fi
ed personnel only. Please
observe the safety regulations issued by the solar module manufacturer!
Additional documentation
Structural analysis
Analysis print-out with schematic diagram
from the plant calculation
Fastener (Fix2000 KlickTop)
