LaQ07 Laminate Mounting Instructions
GB
1
© Schletter GmbH
•
Gewerbegebiet an der B15
•
Alustraße 1
•
83527 Kirchdorf/Haag i. OB
•
Germany
•
Tel.: +49 8072 9191-200
Fax: +49 8072 9191-9200
•
E-mail: [email protected]
•
www.schletter.eu
•
Updated 04/2012
•
Subject to change without notice
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: [email protected]
LaQ07 Laminate
Mounting Instructions
Bearing plate
End clamp
Middle clamp
Safety hook
Safety instructions
Required tools
Screwdriver with bits:
Bit hex-head SW6
Flat wrench / spanner SW15
Corresponding tools
For the selected fasteners
The Schletter tool kit comprises
tools required for all standard systems.
Planning, mounting and start-up of the solar plant must be carried out exclusively by quali
fi
ed specialists. Poor quality execution
can result in damage to the plant and to the building and can present a risk to people.
Risk of falling! There is a risk of falling when working on the roof as well as when ascending and descending the building. Accident
prevention regulations must be observed and appropriate safety equipment must be in place.
Risk of injury! Objects falling from the roof can cause injury to people. The danger area around the installation site must be secured
and people present in the area warned of the risks.
Risk of breakage! PV modules can be damaged if stepped upon.
Risk of electric shock! The mounting and maintenance of the PV modules must be carried out exclusively by quali
fi
ed
specialists. Please observe the all safety regulations issued by the manufacturer!
Module bearing pro
fi
le
Distance pieces
Fastener (Fix2000 Standard)
Additional documentation
Structural analysis
Analysis print-out with schematic diagram
from the plant calculation
