3b Install the lever assembly on the outside of the door.
L
The lever will be installed later.
Make sure the notch
faces the latch. See
3c Secure the inside assembly with the two bottom screws.
Actual Size (2)
3d Move the handing screw and cam stop to the
appropriate position, if necessary.
L
See Determine the Handing on page 1 to determine the
hand of your door.
CAUTION
If the handing screw is not in the correct position, locking and
unlocking could be reversed, resulting in an unsecured residence.
Left hand
position
Right hand
position
OR
Handing screw
and cam stop
4
Apply power to the lock.
4a Connect the cable to the inside assembly.
CAUTION
The connector fits only one way. DO NOT FORCE!
Red wire
4b Install the batteries.
5
Install the inside cover.
5a Place the inside cover on the door.
Align the slot with
the tailpiece.
Thumbturn should
be pointed towards
hinges, with longer
side on top.
Guide the hole onto
the spindle.
