2
Install the top part of the lock.
CAUTION
If the bolt does not remain retracted throughout installation, locking
and unlocking could be reversed, resulting in an unsecured residence.
2a Install the outside deadbolt assembly on the outside of
the door.
Route the cable over
the deadbolt and
through the door.
Clips hold the assembly
on the door.
Route the tailpiece through the slot in the bolt.
2b Adjust the spindle on the inside assembly, if necessary.
CAUTION
If the spindle is not in the correct position, locking and unlocking
could be reversed, resulting in an unsecured residence.
L
See Determine the Handing on page 1 to determine the
hand of your door.
Left hand position
(tabs vertical)
Right hand position
(tabs horizontal)
2c Make sure the cam on the inside assembly is in the
correct position.
CAUTION
If the cam is not in the correct position during installation, locking and
unlocking could be reversed, resulting in an unsecured residence.
2d Install the inside assembly on the inside of the door.
L
Bolt must remain retracted!
Route the cable
through the hole in
the inside assembly.
Guide the slot onto
the tailpiece.
2e Secure the inside assembly with the two top screws.
L
If the screw holes are blocked by the cam, see step 3c.
Actual Size (2)
3
Install the bottom part of the lock.
3a Install the handing plate into the lever assembly.
L
See Determine the Handing on page 1 to determine the
hand of your door.
CAUTION
If the handing plate is not in the correct position, locking and
unlocking could be reversed, resulting in an unsecured residence.
1. Rotate the assembly so the
notch faces the latch
2. Place the handing plate in the correct position. Press
handing plate all the way into the chassis.
Left hand
OR
Right hand
