2
Introduction
2.2
LCD screen
AT-10 plus
Page 14
A
rt.
-n
o.:
2.5
4004
3 Re
v.
: a
• Exercise Keys
–
Exercise
key - exercise ECG settings and function
–
Protocol
key - display/select/ edit exercise protocols
–
Symptoms
key - manual input of symptoms
–
Begin
key - start exercise test (beginning of warm-up phase) according to pro-
tocol set
–
End
key - stop exercise test (start of recovery phase)
–
Print Report
key - print final report (end of recovery phase)
–
Print Rhythm
key - print rhythm strip
–
Next Stage
key - switch to next stage
–
Interrupt Stage
key - interrupts the test i.e. releases load on bike/stops tread-
mill - this function can be used, for example, to administer medication - when
this key is again pressed, the test resumes from the same position
–
Load
key - overwrite protocol and define load
(3) Memory, Storage and transmission Keys:
–
Memory
key - gives access to the stored recordings - memory and transmission
settings are also defined here
–
Store
Data
key - initiates data storage to internal memory of the current record-
ing - the location where the recording is stored in defined in the memory set-
tings.
–
Send
Data
key - initiates transmission over the defined interface of the current
recording - the location where the recording is sent is defined in memory set-
tings
–
Get Data
key - initiates data reception from another location - the location from
where the data is received is defined in the memory settings
(4)
Patient Data
key - Input of patient data
(5) Direct function keys including:
–
Print Screen
key - print the displayed screen
–
Copy 1
and
Copy 2
keys - print a copy of current recording in format 1 or format
2
–
Man Start
key - imitate real time printout
–
Auto Start
key - take auto recording
–
Stop
key - stop real time printout / advance paper to beginning of new page
(6)
Replace Paper
key - extend or retract the paper tray for paper replacement
(7)
On/Off
key - switch the unit on or off
(8) Menu navigation keys including:
–
Menu
key - give access to system settings
–
Confirm
key - confirm current / displayed setting
–
Left arrow
key - move cursor to the left / select next menu option
–
Right arrow
key - move cursor to the right / select previous menu option
–
Up arrow
key - move cursor or menu bar up
–
Down arrow
key - move cursor or menu bar down
– (see page 19)
(9) Further Function Keys for:
–
NIPB
key - take or enter non-invasive blood pressure measurements
–
SPIRO
key - spirometry program (requires spiro sensor connected to the spiro
RS-232 interface)
