12
IN and OUT connections of the watermaker
IN – (sea water inlet from the pump) Make use,
for this connection, of the external holder
located on the left side of the watermaker (marked
IN
).
OUT (Discharge outboard) Make use, for this connection, of the holder located on top of
the pressure amplifier, inside the watermaker unit (marked
OUT
).
Fresh water connection
The connection has to be made, using the small
hose furnished with the equipment, and relevant
endowed fittings.
The connection has to be made between the little
polyethylene pipe that comes out the water-
maker unit (on the right), and the upper side of
the tank, on a ¼” outlet if available.
It is possible, in case of metal tanks, to make a
¼” threaded hole where to connect the endowed
male connector.
