10
2. Installation
2.4 Hydraulic connections
Pressurized fresh water valve
Pump
Elecrovalve
Non return valve
5 micron filter
Net filter
Swan neck upward - Disharge
Water inlet
Watermaker
Active carbon filter
Fresh water outlet
The hydraulic section that is continuously under consistent pressure is the pump outlet – 5 m. filter –
watermaker inlet connections . For this section is necessary to use a good quality
PN 15 min.
rein-
forced hose. An inadequate hose could burst, jeopardizing seriously the safety of the boat.
“Armovin”
type hose
int. dia.
20 mm.
Reinforced hose
PN15 min int.
dia. 20 mm.
Plumb to
pressure
side of
boat fresh
water sys-
Exhausted
discharge
“Armovin”
type hose
int. dia.
16 mm.
