EasyBus - Signalling and Switching Bus System
Installation, Operating and Maintenance Instructions
EasyF-ADC connections | EasyF-AAC connections
Construction subject to change
No return possible
Version: 2017-11-13 | Page 3
EASYF-ADC CONNECTIONS
General:
The EasyF-ADC module is used for connecting and controlling
a 24V DC motorised actuator, for example, of a fire damper
or a smoke extraction damper.
The EASYF-ADC is equipped with the corresponding
connections for the preassembled spring return actuators by
Belimo.
Cons.
No.
Figure
Description
Terminal /
pin
Terminals for connection to the EasyBus network 230 V AC
1
230V AC/50Hz
Terminal 1
230V AC/50Hz
Terminal 2
Zero conductor
Terminal 3
Zero conductor
Terminal 4
Programming and visualisation
2
7-segment display and
Programming key
Hardware contact
3
Smoke detector
contact
Terminal 1
V24VDC
Terminal 2
V24V DC
Terminal 3
Ground (GND)
Terminal 4
Connection plug for the motor
4
Opening control
Pin 1
Ground (GND)
Pin 2
Closing control
Pin 3
Connection plug for the end positions
5
Damper open >80°
Pin 1
Ground
Pin 2
Ground
Pin 3
Damper closed <5°
Pin 4
Reserve
Pin 5
Reserve
Pin 6
EASYF-AAC CONNECTIONS
General:
The EasyF-AAC module is used for connecting and controlling
a 230V AC motorised actuator, for example, of a fire damper
or a smoke extraction damper.
Cons.
No.
Figure Description
Terminal /
pin
Terminals for connection
to the EasyBus network 230 V AC
1
230V AC/50Hz
Terminal 1
230V AC/50Hz
Terminal 2
Zero conductor
Terminal 3
Zero conductor
Terminal 4
Programming and visualisation
2
7-segment display and
programming key
Terminals for the motor
3
230V AC/50Hz
Terminal 1
Zero conductor
Terminal 2
Opening control
Terminal 3
Neutral conductor N
Terminal 4
Closing control
Terminal 5
Hardware contact
4
Contact NO
Pin 1
V24V DC
Pin 2
Connection plug for the end positions
5
Damper open >80°
Terminal 1
Ground Terminal
2
Ground Terminal
3
Damper closed <5°
Terminal 4
Reserve Terminal
5
Reserve Terminal
6
1
3
4
5
2
1
3
4
5
2
