Schaerer Euroca 2, User Manual

Page: 66 / 99

Local control
Page 5-34 BASE-2-02.05
5.7.2.3. Release keys
1. Push KEY BLOCK card into the card reader.
2. All product keys which do not light up red are blocked:
3. Press product key, which is to be released. The lamp of the relevant key lights up red.
4. Draw out the KEY BLOCK card.
‹
If all product key have been previously blocked with the key and are unchanged, then
the procedure can be reversed:
Î
Press key, the previously blocked keys are now released again.
‹
Also several keys can be released in one process.
‹
Non-programmed product keys do not light up when the KEY BLOCK card is inserted
and cannot be released / blocked.
5.7.3. COFFEE TEST card
With the COFFEE TEST card a grinding quantity test can be executed and the grinding
period per coffee product can be changed.
The functional possibilities of the COFFEE TEST card will also be appreciated by the
coffee supplier if he wishes to harmonise a new mixture to the machine.
5.7.3.1. Menu overview
-
Grinding quantity test
‹
At the end of each menu the following applies:
Draw out COFFEE TEST card -> normal operational readiness.
5.7.3.2. Grinding quantity test programme
1. Push COFFEE TEST card into the card reader:
2. Take out grounds container -> Automat moves to brewing position:
3. Place flat container in the container cavity below the automat.
4. Press coffee product whose grinding quantity is to be verified -> the ground product falls
into the container.
5. Verify grinding quantity.
key to raise the ground product in %.
key to reduce the ground product in %.
After terminating the ground product setting the newly set value is automatically at
100%.
ª
button locked
select product
grinder test
remove container
grinder test
select product
grinder test
grind quantity 0%