Schaerer Euroca 2, User Manual

Page: 35 / 99

Local control
BASE-2-02.05 Page 5-3
5.1
Introduction
The indications in this chapter will help you to get acquainted with the basic functions of
your machine. They are the basic conditions for a simple daily use without any
difficulties.
‹
A correct installation by the authorized Schaerer representative is the basic condition for
a proper functionning of the Euroca-2.
CAUTION : Improper use can result in scalding!
5.2 Daily use
5.2.1
Preparation / to put the machine in operation
1. Before switching on the machine make sure that :
- the machine is connected to the main power supply
- the water connection is open
- the beans container is filled up
- the bean container is empty
- on the display (not illuminated yet) appears :
2. Push button -> All keys are illuminated for a short period.
The following indication appears on the display:
as soon as the machine
has the right temperature:
‹
For machines with fresh water tank, see chapter 5.5.
‹
Depending on the programming of your machine, especially when operated with an
active accounting system, a different information appears on the display when the
machine is in the basic operation mode.
‹
When the cleaning program has been used before turning off the machine, a rinsing
program will follow right after putting the machine in operation again. Afterwards, only if
programmed, a „blind coffee“ will be delivered.
‹
By active key-switch function, the CHEF-card must be inserted into the card reader for
switching on.
5.2.2 Preparation of beverages
‹
If your machine has been installed and logged-on to an accounting system, please read
the instructions in chapter 6.0.
‹
Coffee and hot water are simultaneously ready for drawing.
‹
By pressing the key, preselected products are deleted ( only if no accounting is active ).
‹
If the key is pressed for more than two seconds, then all active products are
interrupted (Coffeeproducts can producted only draving brewphase).
1. Put the cup underneath the outlet. ( The delivery height can be adapted to the cup)
2. Press the desired product key.
3. The key you have selected lights up green. The following message appears on the
display:
ª
<<stand by>>
12.00 22.01.1999
select product
12:00 22.01.1999
selection locked
heating up