Schaerer Euroca 2, User Manual

Page: 38 / 99

Local control
Page 5-6 BASE-2-02.05
‹
By pushing the -key again, the outcome of the water will be finished, as long as the
Start / Stop-operation is released.
‹
Hot water can not be preselected.
‹
When the Euroca-2 is switched on and is heating up, a selection of hot water is locked.
CAUTION : Improper use can result in scalding!
5.2.5. Heating up of beverages
1. Push the -key twice shortly, in order to remove the condensed water out of the lines
2. Plunge the steam tube into the filled cup (down to the bottom).
3. Push the -key again
At the same time the steam flows out.
4. The beverage is heated by lifting and lowering the cup (the deeper the sound, the higher
the temperature). The delivery of steam will automatically stop, after the programmed
time has been reached.
5. Repeat step 3 and 4 until the required temperature is reached.
6. Put the cup aside.
7. Clean the steam tube with a wet towel.
8. Push -key twice again (= steam tube is now cleaned).
‹
By pushing the -key again, the steam delivery can be stopped in advance, if the
Start / Stop-operation has been released.
‹
The steam tube has to be plunged in the liquid during the outcome.
‹
When the liquid has reached the boiling point, it may start to splash.
‹
If you purchase steam and the machine is working with an accounting system, right after
the purchase you can push the cleaning key then a short steam output is released to
clean the steam tube.
‹
The steam can not be preselected.
‹
When the Euroca-2 is switched on and is heating up, a selection of steamproducts is
locked.
CAUTION : Improper use can result in scalding!
select product