Schaerer Euroca 2, User Manual

Page: 90 / 99

Product description of the Frigo
Page 7-10 BASE-2-02.07
7.6.4. Cleaning care of the Frigo
1. External cleaning :
Wash the outside of the Frigo with lukewarm water, wipe with cold water
and dry with a soft cloth. Do not use scouring agents.
2. Internal cleaning :
Take out the milk container and clean it. Clean the Frigo with lukewarm
water containing bicarbonate of soda or vinegar. Rinse with water and
dry thoroughly with a soft cloth. On no account use scouring or cleaning
agents or soap.
3. General :
If the Frigo is taken out of use for long periods then the following
measures must be taken to avoid the formation of mould and unpleasant
odours:
Empty the Frigo completely, clean the interior and leave the door partly
open.
(If the power supply of the Frigo is not connected to the Euroca II, then
disconnect it from the mains supply.)
Please note that the Frigo must be switched on at least an hour before
use so that the cooling circuit is fully operationally ready (3 - 5°C).
4. Condenser :
The condenser should be cleaned at
least once a year with a vacuum
cleaner or a dry brush. See illustration
(this is done by the service technician).
For daily cleaning see also under Section 5.3.1.