Schaerer Euroca 2, User Manual

Page: 57 / 99

Local control
BASE-2-02.05 Page 5-25
5.6.1.10. Change PIN code
1. Push CHEF card into the card reader.
2. Press or
keys till menu:
3. Press key.
4. With
the - and keys set first digit of the new PIN code.
5. With key confirm.
6. For each further digit repeat steps 4 and 5, until the PIN code has been completely
entered.
7. Press or keys to reach the next menu,
draw out CHEF card
Î
normal operational readiness.
‹
With the key the already set values can be taken over.
‹
PIN code only active with the appropriate programming.
‹
The current PIN code is not displayed.
5.6.2. SAVE DATA card
The SAVE DATA card is a security card on which all machine data can be stored
securely.
‹
Whenever setting changes have been made by the service technician, the Euroca-2
requests the programmer to save the newly set values on the SAVE DATA cards (A +
B).
‹
The SAVE DATA cards should be kept in a safe place where it can be readily found.
‹
Only use the SAVE DATA cards after prior discussion with the authorised SCHAERER
customer service.
SAVE DATA = Level A
SAVE DATA = Level B
5.6.2.1. Menu overview
- Machine
Î
Card
- Card
Î
Machine
‹
At the end of each menu the following applies:
draw out SAVE DATA card è normal operational readiness.
change PIN code
execute ' Decaf '
PIN-code 0000
`+/- ` ` Decaf `
Æ