BASCAP_TOUCHIT_EN
V04 | 10.2018
49
Operation
Switching off
End of operation
Option 1: Operator service mode
►
Perform the daily cleaning routine.
►
Press the [Service] field.
The machine switches to standby.
Option 2: Self-service without PIN
►
Perform the daily cleaning routine.
►
Call up the hidden [Service] menu.
The [Service] menu appears.
►
Press "Standby".
The machine switches to standby.
Option 3: Self-service with PIN
►
Perform the daily cleaning routine.
►
Call up the hidden [Service] menu.
The [Entry field] for the PIN appears.
►
Enter the PIN.
The [Service] menu appears.
►
Press "Standby".
The machine switches to standby.
Option 4: External drinking and waste water tank
►
Empty the drinking water tank and rinse it with fresh water.
►
Empty the waste water tank and clean it thoroughly with fresh water.
Option 5: Milk system
►
Remove the milk container.
►
Empty and clean the milk container.
Lengthy downtimes (more than 1 week)
Proceed as for end of operation. Additional steps:
►
Disconnect the power plug of the machine from the power supply.
The machine is de-energised.
►
Close the stopcock of the drinking water supply.
CAUTION!
Risk of machine
damage!
There is a risk that the water pump may run dry.
When taking the device back into service, the stopcock of the drinking water supply
must be opened before the machine is switched on.
After a long period of out of operation, the machine must be cleaned after it has been switched
on.
Failure to do so will result in a loss of warranty coverage in the event of damage.
