SCANMASKIN 32 PROPANE, Manual

Page: 56 / 60

56
www.scanmaskin.com
7 Warranty
This product from Scanmaskin Sweden AB comes with a 24-month warranty or 1500 hours, whichever
comes first.
Scanmaskin Sweden AB warrants to the original end user, each new machine, new accessories and ge-
nuine replacement parts against defects in material and workmanship under normal use and service.
Warranty coverage shall begin on the date of purchase by the original end user (as evidenced by your
invoice from the factory or Authorized Dealer) or six (6) months from the date the machine was ship-
ped from the factory, whichever comes first. The warranty registration form must be completed within
30 days of purchase visit www.scanmaskin.com/register-your-product/ to fill in the form.
Our obligation under this warranty is limited to repair or replacement of the defective item at our
factory or by an Authorized Service Center according to the following conditions:
1. The warranty only applies to persons that have legal right to the equipment during the warran-
ty period.
2. The manufacturer’s undertaking is limited to the repair of defective parts or the replacement of
these according to the manufacturer’s assessment. Costs and risks for transport as well as dis-
mantling and reinstallation of the product / products and other direct or indirect costs, associa-
ted with the repair in question, are not covered by this warranty.
3. Periodic inspections, adjustments, maintenance work and changes are not covered by the war-
ranty.
4. Scanmaskin is not liable for any damages to grinding discs, drive belts or other similar equip-
ment.
5. The machine must be equipped with grinding tools approved by Scanmaskin Sweden AB
6. The warranty only applies to material and design deficiencies and does not apply in the fol -
lowing cases:
a. Damage caused through accidents, carelessness, changes, use of spare parts or grinding
tools that are not original components, or incorrect use and installation.
b. Damage caused by lightning, water, fire, vandalism, incorrect mains voltage, incorrect
ventilation or other causes that lie outside of the manufacturer’s control.
7. Scanmaskin reserves the right to modify the design – or make improvements without obligation
to change previously manufactured products.
8. Costs for repairs, carried out by an unauthorised workshop, will not be reimbursed by Scanma-
skin. If such repairs damage this product these are not cover by the warranty agreement.