SCANMASKIN 32 PROPANE, Manual

Page: 31 / 60

ENGLISH
SCANMASKIN World Series 32 Propane
31
www.scanmaskin.com
5.6 Trouble shooting
5.6.1 Common faults
Symptom Cause Correction A1
Starter motor does
not operate
• Weak or dead battery
• Start key is faulty
• For additional Causes
• Recharge or replace battery
• Check and replace key/switch
• See engine manual or dealer
O
O
O
Engine turns over
but does not start
or run
• Fuel tank not connected
• Fuel tank empty
• No fire at spark plug
• Engine oil Pressure low
• Oil Pressure Switch faulty
• The emergency stop button is depressed
• For additional causes
• Disconnect and reconnect tank
• Refill or replace tank
• Replace Spark plug
• Check and fill Oil to correct level
• Check and replace oil pressure switch
• Release the emergency stop button.
• See Engine manual or dealar
O
O
O
O
O
O
O
Engine runs with
loss of power or
excessive exhaust
fumes
• Restriction in Air cleaner
• Ignition System Misfire
• Poor compression or timing
• Service air cleaner
• Check or replace ignition coils
• See engine manual or dealer
O
O
O
Engine running
hot or over hea-
ting
• Intake screen or bonnet filter clogged
• Cooling Fins Clogged
• Clean Screen and or bonnet filter
• See engine manual for cleaning
O
O
High Oil
consumption
 Numerous causes  See engine manual or dealer O
Engine Knocks
and other engine
noices
 Numerous causes  See engine manual or dealer O
The machine
vibrates a lot
 The grinding speed is to high  Lower the speed O
 The tools are damaged  Inspect the tools
 Change the tools if needed
O
O