SCANMASKIN 32 PROPANE, Manual, Page: 23 / 60

ENGLISH
SCANMASKIN World Series 32 Propane
23
www.scanmaskin.com
Item Text Description Partnumber
1 Speed / Hour Meter Total running hours / Head speed
during operation
580468
2 Water Off/On Engage the water flow 596020
3 EMERGENCY STOP Emergency Stop 596020
4 Ignition key Starts and Stops the engine 581094
Table 4 1 Description of the control panels.
4.5 Throttle
The throttle is designed to make sure that the operator always has enough engine speed while
operating the machine. The lowest speed during operation is 750 rpm on the tachometer and
this is to make sure the centrifugal clutch is fully engaged.
If the throttle is tampered with and the machine is operated below 750 rpm there is great risk
that parts will get damaged inside the machine.
To engage the grinding speed the knob on the throttle is pushed outward and forward, there
is 5 speeds available for operation / grinding and as soon as it´s lowered below the first set
speed it will fall back to idle speed. The maximum idle speed is 500 rpm on the tachometer.
Figure 9 Throttle, lowest speed Figure 8 Full Throttle Figure 7 Idle speed
4.6 Start up
See ”4.1 Preparation” before starting the machine.
How to start the machine
• Check the engine oil.
• Make sure that proper grinding tools is attach to the machine “0
• Changing tools” check the grinding guide for best choice.