SCANMASKIN 32 PROPANE, Manual

Page: 15 / 60

ENGLISH
SCANMASKIN World Series 32 Propane
15
www.scanmaskin.com
equipment, carrying out maintenance work or training staff to work with the machine.
From time to time the working practices of the operators are to be checked by a supervisor
especially to the items regarding awareness of safety and hazards.
Always wear Carbon Monoxide Indicator badges as an extra precaution.The plastic indicator
contains a colored indicator button that darkens in the presence of Carbon Monoxide. The
relative darkness of the indicator button indicates the level of CO in the ambient atmosphere.
Most indicator badges have a useful life of 30 days, depending on the concentration of conta-
minants, humidity, and temperature.
Operators must tie back long hair, and not wear loose clothing or jewelry including rings. The-
re is a risk of injury through items getting caught, or being drawn into moving machinery.
Eye and ear protection must be worn at all times!
Use personnel protection equipment if necessary or required by local regulations! Take notice
of all safety and hazard notices on the machine!
All safety and hazard notices at or on the machine must be kept complete and legible!
If safety-critical changes occur to the machine or its working method, the machine must be
shut down immediately! The cause of the fault must be established, and rectified.
Changes, add-ons or conversation to the machine, which might impair safety, must not be
made, without the manufacturer’s permission!
This applies in particular to the fitting and adjustment of safety devices.
Spare parts must comply with the technical requirements specified by the manufacturer. This is
always guaranteed if original spare parts are used.
Intervals for recurring checks and inspections specified in this User Manual must be complied
with!
To perform maintenance work correctly it is imperative to be equipped with the proper tools
for the task in question.
Repairs may only be made by Scanmaskin Sweden AB certified service technicians.
Some grinding work may generate sparks under certain circumstances. Personnel working
with the machine must therefore be aware of the risk of fire and how to handle a fire situation
properly.
Do not use the machine in areas with highly flammable and/or explosive materials.