Scanivalve MPS4232, Hardware And Software Manual

Page: 76 / 96

70
MPS4232
Section 5: Software
Precision Time Protocol Variables (LIST PTP)
The precision time protocol settings control the PTP 1588 settings of the MPS4200. The PTP configuration is accessed by the
command LIST PTP.
LIST Precision Time Protocol Settings (LIST PTP)
DESCRIPTION Returns all of the PTP settings
SYNTAX LIST PTP
RETURNS All of the PTP setting followed by the prompt.
EXAMPLE
LIST PTP
SET PTPEN 1
SET STAT 0
SET SST 0:0:0.000000
SET SSD 1971/1/1
SET UTCOFFSET -7:00:00
>
Set PTP Enable (PTPEN)
COMMAND PTPEN
TYPE Set/Get
DESCRIPTION Enables the precision time protocol engine in the MPS4200. When PTPEN is set to 2, the MPS will
serve as a PTP master.
SYNTAX SET PTPEN <status>
Where <status> is:
0 = off
1 = PTP Slave unit
2 = PTP Master unit
RETURNS Prompt when ready to accept a new command
EXAMPLE
SET PTPEN 1
>
DEFAULT 0
RANGE 0 to 2
NOTES In order to set a MPS to a PTP Master (PTPEN == 2), PTP must first be disabled (PTPEN == 0).
PTPEN 2 cannot be set when PTPEN == 1.
Set PTP Statistical Output (STAT)
COMMAND STAT
TYPE Set/Get
DESCRIPTION Sets the destination of PTP statistical output
SYNTAX SET STAT <level code>
Where <level code> is:
0 = off
1 = serial
2 = network