Scanivalve MPS4232, Hardware And Software Manual

Page: 46 / 96

40
MPS4232
Section 5: Software
Calibration Version
COMMAND CALVER
TYPE Get
DESCRIPTION Retrieves the software version of the MPS used during the last saved calibration.
SYNTAX
CALVER
RETURNS The version string followed by the prompt when ready to accept a new command.
EXAMPLE CALVER
1.08
>
Flash Directory Contents
COMMAND DIR
TYPE Get
DESCRIPTION Returns the files saved on the flash memory, including the total size (bytes).
SYNTAX
DIR
RETURNS Prompt when ready to accept a new command.
EXAMPLE DIR
filename
v100.mps
scan.cfg
ip.cfg
Cal_1.cfg
>
size
942080
122
89
11336
Delete File
COMMAND DELFILE
TYPE Function
DESCRIPTION Deletes a selected file from flash memory.
SYNTAX DELETE <filename>
Where <filename> is the name of the file on the flash, including the extension.
RETURNS Prompt when ready to accept a new command.
EXAMPLE DELETE FILE scan.cfg
>
Load Configuration File
COMMAND LOAD
TYPE Function
DESCRIPTION Commands the MPS to load settings stored in a file on the flash to RAM.
SYNTAX LOAD <filename>
Where <filename> is the name of the file, including the extension. The file must be a configura -
tion file.
RETURNS Prompt when ready to accept a new command.