Scanivalve MPS4232, Hardware And Software Manual

Page: 49 / 96

43
MPS4232
Section 5: Software
COMMAND STOP
TYPE Function
DESCRIPTION Cancels all commands or routines and returns the MPS to READY mode.
SYNTAX STOP or <ESC>
RETURNS Prompt when ready to accept a new command.
EXAMPLE STOP
>
NOTES This command is accepted at all times.
Reboot
COMMAND REBOOT
TYPE Function
DESCRIPTION Reboots the MPS (soft reboot).
SYNTAX
REBOOT
RETURNS Nothing.
EXAMPLE REBOOT
Format Flash
COMMAND FDISK
TYPE Function
DESCRIPTION Erases and formats the internal memory.
WARNING: All data will be lost, including configuration files.
Once the command is issued, the MPS will respond with a confirmation message to approve the
FDISK command or to cancel.
SYNTAX
FDISK
RETURNS Type FDISKCONFIRM to confirm FDISK or STOP to escape FDISK Formatting…
Prompt when ready for next command.
EXAMPLE FDISK
Type FDISKCONFIRM to confirm FDISK or STOP to escape FDISK Formatting…
>
NOTES FDISK will not remove the installed firmware application.
NOTES FSIDKCONFIRM will trigger a Format Completed! message.
Read Current Temperature
COMMAND TREAD
TYPE Get
DESCRIPTION Returns the current internal RTD temperatures.
SYNTAX TREAD [<channel>]
Where channel is a temperature channel number from 1 to 8. When omitted all temperature
channels are returned.
RETURNS Temperature of the internal RTDs
EXAMPLE
TREAD
32.687500,32.375000,32.500000,32.437500
>