SC2000 PTA1587X, User Instruction

Page: 16 / 28

OFF OFF ON OFF OFF OFF OFF
OFF
ON OFF ON OFF OFF OFF OFF
OFF
ON OFF ON OFF OFF OFF OFF
OFF
OFF OFF OFF
ON
OFF OFF OFF
OFF
ON ON ON OFF OFF OFF OFF
OFF
4
5
6
7
8
ON ON OFF ON OFF OFF OFF
OFF
11
- - - - - - - - - - - - - - - - - - - - - - - -
ON
ON ON
ON
ON ON ON ON
ON
OFF ON
ON
ON ON ON ON
- - -
254
255
OFF OFF ON ON OFF OFF OFF OFF 12
Note: Please check rated voltage and power supply carefully, rated voltage
and current as bellow:
rated voltage range
current
rated voltage
Control line connection
Connect RS485 line to keyboard controller or DVR, if there are more than one
need to be controlled by keyboard or DVR, please connect it in parallel.
Note: (1) protocol and baud rate of keyboard and DVR can be set by customer, just
make sure it is same with that of speed dome.
(2) the ID of different speed dome which is in same system shall be set as different.
(3)It should set the difference PTZ Camera Address in Monitor system with multi
cameras.
2.5 Power supply and control cable connection
Power supply connection
2.6 Connection Method
Connection method as bellow diagram, connect video cable, control cable,
power supply cable in turn. Connection method of keyboard can refer to
keyboard manual (connection cable order based on keyboard model, here only
provide one possible example), please refer to bellow diagram for detail.
- 1 3-
In
s
ta
lla
ti
o
n
Chapter 2 Installation
ON OFF
OFF
ON OFF OFF OFF
OFF
ON OFF OFF ON OFF OFF OFF
OFF
9
10
± 10% 4A
H:DC12V ( AC 24V Optional)
± 10% 2A
R:DC12V