SC2000 PTA1587X, User Instruction

Page: 14 / 28

- 1 1 -
In
s
ta
lla
ti
o
n
Chapter 2 Installation
Step 8-Fix speed dome camera on wall.
In order to get good waterproof effect, first install rubber seals on wall mount bracket,
and lead the cable out from the wiring port, then fix it on the wall
by using 4 screws.
Seal the wiring port of the bracket by using silicon sealant.
Step 9-Cable Connection
Please refer to section six of this chapter-Connection method.
Step 10-Tear off protection film
Teal off protection film of transparent cover
Note: please take care of transparent cover.