SC2000 PTA1587X, User Instruction

Page: 11 / 28

Step 7-Connect speed dome and bracket
Put speed dome camera connection port into bracket hole, screw 4pcs
hexagon screws into corresponding screw holes.
Step 8-Fix speed dome camera.
In order to get good waterproof effect, first install rubber seals on bracket,
and lead the cable out from the wiring port, then fix it on the wall/ceiling by
using 4 screws. Seal the wiring port of the bracket by using silicon sealant.
Step 9-Cable Connection
Please refer to section six of this chapter-Connection method.
Chapter 2 Installation
- 8-
In
s
ta
lla
ti
o
n