SC2000 PTA1587X, User Instruction

Page: 4 / 28

- 1-
Careful Transport
During transport, custody and install process should prevent weight, severe
vibration and soak damage to product.
Do Not Disassemble Zoom Camera
In order to well match night vision, we sell IR speed dome camera with zoom
camera, please not disassemble zoom camera if there is no technical person.
Power Supply, Video Cable and Control Cable
For power supply cable, video cable and control cable, please adopt shielded
cable and independent wiring, can not mix with other cables.
Electric Safety
Should obey all kinds of electric standard when using speed dome camera,
make sure signal cable keep enough distance(at least 50m)with high voltage
equipment or cables. If it is possible, please take lightning and surge
measurement.
Clean
When clean camera housing, please use dry soft cloth to wipe, If it is too
dirty, please use neutral cleaner to wipe lightly. Do not use strong or grind
cleaner to prevent its housing from scratching.
Strictly Sealed
Prevent liquid or other things get into speed dome housing, else it will cause
permanent damage.
Please do not use camera beyond limited temperature and humidity
Speed dome camera working temperature
: -25 ℃ to 50 ℃,
humidity less than
90%.
Please do not install camera near air conditioner’s outlet
Under following situation, lens will be fogged because of condensation:
*Use under the environment where the temperature rise and down
frequently which caused by the air conditioner power on and off frequently.
*Use in environment which can make glass fog.
*Use in environment full with smoke or dust.
Please do not make camera toward to strong light source, such as the sun
Toward camera to strong light source for a long time will damage the color
filter on CCD or CMOS, then it will make image lose color.
CAUTION
c
a
u
ti
o
n