SC2000 PTA1587X, User Instruction

Page: 13 / 28

- 1 0-
In
s
ta
lla
ti
o
n
Chapter 2 Installation
Step 4-Set DIP switch.
Please refer to section 3 of this chapter-Baud
rate setup.
Step 6-Lead cable through wall mount bracket.
Lead the cable through wall mount bracket hole.
Step 5-install transparent cover of DIP
switch.
After finishing baud rate setup, install
transparent cover of DIP switch again.
Step 7-Connect speed dome and wall mount bracket.
Put speed dome camera connection port into bracket hole, screw 4pcs hexagon
screws into corresponding screw holes.
M4-
screws
M4-
screws