Navsight Solution
– Hardware Manual
NAVSIGHTHM.1.4
7.7.7. CA-NAVS-SPLIT-COM-0.5M
This cable is designed for easy external GNSS integration, thanks to
dedicated RS-232/RS-422 serial connector and a PPS input connector.
General characteristics are the following
●
1 x ODU Mini-Snap F Series S31F1C-P08MFG0-5500 plug
●
1x Male DB-9 plug
●
1x BNC plug for PPS input (SYNC IN)
●
IP-68 rating
●
50cm long
Cable wiring depends on the port on which user will connect the cable and is as follows
Pin on DB-9 plug
PORT A
PORT B/C/D/E
1
-
-
2
PORT A RX
PORT # RX / RX+
3
PORT A TX
PORT # TX / TX-
4
SYNC OUT A
NC
5
SGND
SGND
6
-
RX-
7
-
TX+
8
-
-
9
-
-
Note: This cable is included in the rugged processing unit package in its external GNSS version (-E).
It can also be ordered separately.
61/73
Figure 7.11 : Spliter cable
adapter
