Navsight Solution
– Hardware Manual
NAVSIGHTHM.1.4
9. Appendix C: Products labels
SBG Systems manufacturing process is based on EN-9100 system with individual and full traceability of
every component and operation. Each device is identified by a unique serial number which is used to trace
all operations during the product lifetime such as manufacturing, calibration, tests and repairs.
In addition to a unique serial number, a “Hardware Code” and associated hardware revision are used to
identify the exact hardware model.
Finally, the “Part Number” is used for logistics purpose. It identifies uniquely the full product configuration,
including hardware type, software options, and any software or process customization.
You can find on then side of your Apogee a laser printed labels that hold the Hardware Code as well as Serial
Number and Hardware Revision. This labels also include a data-matrix code that encodes the device unique
serial number.
In addition, the packaging box includes a second label that provides other useful information such as exact
part number and installed firmware version.
73/73
Figure 9.1: Example of INS label
Figure 9.2: Example of packaging label
