Navsight Solution
– Hardware Manual
NAVSIGHTHM.1.4
5. Processing unit Interfaces specifications
5.1. Rugged version Overview
Following diagrams show the different interfaces available on a Navsight processing unit. Front face is
dedicated to quick user access to main functions and status indication.
The back face of Navsight processing unit is used to hold all electrical connections. A single connector is
generally dedicated to a single interface to enable easy connections on various systems. A specific keying or
connector type ensures that there will be no mis-connection (eg. Ethernet cable cannot be connected on a
serial port interface).
All connectors that are not always used are dust protected with appropriate caps.
31/73
Figure 5.1: Navsight Rugged Processing unit front face user interface
Figure 5.2: Navsight rugged processing unit back face interfaces
Power supply
PPS output
Ethernet
CAN Bus
GNSS Antennas
IMU Connection
Serial ports
Power
ON/OFF + status
Ethernet
status
GNSS
status
INS
status
Datalogger
ON/OFF+ status
