Navsight Solution
– Hardware Manual
NAVSIGHTHM.1.4
2.3.5. Internal GNSS (Trimble, HW revision >= 1.5)
The NAVSIGHT-T embed a high end, survey grade, dual antenna, Trimble GNSS receiver that is perfectly
fitted for the very demanding survey market.
It features L1/L2/L5 and L-Band signals tracking and uses GPS, GLONASS, BEIDOU and GALILEO
constellations to provide very accurate and reliable measurements even in harsh environments.
The internal L-Band demodulator supports OmniSTAR and Marinestar Precise Point Positioning (PPP)
services to delivery world wide, with no specific infrastructure, a positioning accuracy better than 10 cm.
This high performance GNSS receiver also features very accurate RTK positioning. This receiver provides
excellent accuracy and reliability in harsh GNSS environments.
Specification
Remark
Channels
336
Signal tracking
GPS: L1 C/A, L2E, L2C, L5
GLONASS: L1 C/A, L2 C/A, L3 CDMA
Galileo: E1, E5A, E5B, E5AltBOC, E6
Beidou B1, B2, B3
SBAS,
QZSS L1 C/A, L2C, L5
L-Band OmniSTAR, RTX
Horizontal position
accuracy
(1 sigma)
SBAS / DGPS
0.5 m / 0.25 m
PPP support requires a valid subscription
from a third party PPP service provider.
RTK positioning mode available in option
PPP
10 cm
RTK
0.8 cm + 1 ppm
Velocity accuracy
0.7 cm/s RMS
True Heading Accuracy
0.09 °
0.05 °
2m baseline
10m baseline
GNSS only true heading accuracy, not
enhanced by the INS.
Operating Limits
Altitude: 18 000m *
Velocity: 515 m/s *
Acceleration: 11g
*Due to export control
Time to First Fix
Cold start
< 45 s
Warm start
< 30 s
Signal reacquisition
L1/L2/L5
< 2.0 s
Output frequency
PVT: 5Hz
Raw data: 1Hz
Diff. Corrections input
RTCM V2.1 V2.2, V2.3, V3.0, V3.1
CMR, CMR+, SCMRX
22/73
