6
www.sawo.com | [email protected]
TECHNICAL GUIDE
STN Steam Generators
Installation
Water Filter / Softener
Water source
Power supply
Water inlet
Control unit
Steam Line
Autodrain
Drain
Dosing nozzle
Temperature Sensor
Scent Pump
Steam Head
Over
Pressure
Demand
Button
Steam
generator
1. Location of the steam generator has to be near the steam room. Place it within 7,5 meters to the steam room.
2. Steam generator has to be installed outside the steam room.
3. The steam generator must not be installed outdoors or areas that may damage the unit due to climate conditions.
4. Do not install the steam generator or plumbing lines in unheated attic or any locations where water could freeze.
5. The steam generator must not be installed in areas near flammable or corrosive materials or chemicals such as gasoline,
paint thinners, chlorine or the like.
6. Provide a level surface to install steam generator. Side hole slots are provided for wall mounting. Make sure that the steam
generator is secured and is level when mounted on the wall.
7. The steam generator has to be installed in an upright position only.
8. Install water filter and softener or alike when necessary.
9. Leave enough space for service and maintenance of the generator.
For illustrative purposes only.