Savin IS330DC, Setup Manual

Page: 18 / 238

Getting Started
6
1
Understanding the Indicators
This unit is equipped with the following indicators.
1.
Power On
2.
Machine Busy
3.
Document in Place
4.
Error
Under normal circumstances, the indicators of this unit are as follows. Under
other circumstances, an error reading will occur. Refer to resolve the error.
✩
:On
★
:Flashing
-:Off
1 2 3 4
ZDLH030E
Description
✩ ✩ ✩ ✩
When switching on the power or
when performing a hard reset
(for only a few seconds)
✩
- - -
When the Automatic Document
Feeder (ADF) contains no docu-
ments and scanning is not taking
place
✩
-
✩
-
When the Automatic Document
Feeder (ADF) contains a document
but scanning is not taking place.
✩ ✩
- -
During the transmission of scanned data
(No Documents in the ADF)
✩ ✩ ✩
-
During the transmission of scanned data.
(Documents in the ADF)
✩
-
★
-
During standby for manual scan.
(Before pressing the
{
Start
}
key)
★
- - - During the Low Power mode
★
-
★
-
When manual scan is in the standby
mode during the Low Power mode.
RuSCSup_EN-5_FM.book Page 6 Tuesday, October 9, 2001 5:04 PM