Savin IS330DC, Setup Manual

Page: 98 / 238

ScanRouter V2 Lite Installation
12
3
Uninstalling ScanRouter V2 Lite
This section explains how to uninstall
ScanRouter V2 Lite.
The contents of the RDCab folder re-
main after ScanRouter V2 Lite is unin-
stalled.
Important
❒
Before uninstallation, be sure to
back up the system and various
data. Stop the delivery server from
the ScanRouter V2 Administration
Utility.
Note
❒
ScanRouter V2 Lite cannot be un-
installed when network devices
are configured in
[ Set I/O Device ] . To
uninstall ScanRouter V2 Lite, de-
lete all the network devices set in
[ Set I/O Device ] first.
A
Exit the ScanRouter V2 Adminis-
tration Utility.
B
Select ScanRouter V2 Lite in
[ Add
and Delete Application ] on the con-
trol panel, and then select [ Add and
Delete ] or [ Change/Delete ] .
The "InstallShield Wizard" dialog
box appears.
C
Select "Delete" and then select
[ Next ] .
The Confirmation dialog box ap-
pears.
D
Select [ OK ] .
E
Select if setting information such
as a destination is deleted.
ScanRouter V2 Lite has been unin-
stalled and "Exit of Maintenance"
appears.
Note
❒
If you are asked to delete a file
which may be shared with other
programs, select
[ No ] .
F
Select [ Complete ] .
Note
❒
If only ScanRouter V2 Lite is in-
stalled in a computer, you can
delete the RDCab folder (or a
f o l d e r s p e c i f i e d a s a d a t a
path)
⇒
P.7 “ScanRouter V2 Lite
Installation” . If DeskTopBinder
V2 or ScanRouter V2 Link is in-
stalled in the same computer,
however, do not delete the RD-
Cab folder (or a folder specified
as a data path). If you want to
delete the data in ScanRouter
V2 Lite, delete the DR folder
and the DRTmp folder in the
RDCab folder (or a folder speci-
fied as a data path)