Savin IS300e, Operating Instructions Manual

Page: 124 / 224

Setting Originals
116
4
Placing the Original on the
Exposure Glass
Important
❒
Be careful not to pinch your fingers
when closing the ADF.
❒
To activate the auto detection of an
original, place the original after
this machine starts up.
AAAA
Lift the ADF.
Note
❒
Be sure to lift the exposure glass
cover or ADF more than 30°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
BBBB
With the side to be scanned facing
down, place the original on the
exposure glass, and align it with
the home position and scale.
Important
❒
Do not press down on the expo-
sure glass. Strong pressure on
the exposure glass could cause
it to break.
A When the original width is
297mm (11.7”) or less
B
When the original width is wid-
er than 297mm (11.7”)
When a document is set in this
direction, it is generally neces-
sary to change the document
setting direction at the point of
transmission.
⇒
p.113 “Simplex
Scanning”
CCCC
Gently lower the ADF.
ADG015S
ADG016S