Section 4: Cleaning and Maintenance
Page 4-4
XL400/410e Operator’s Manual
4.3 CLEANING THE PRINT HEAD, PLATEN, ROLLERS AND SENSORS (CONT’D)
10. Moisten a cotton swab with SATO
Thermal Print Head and Platen Cleaner.
11. Carefully clean the entire surface of the
Cut Roller. Rotate the roller to expose
the complete surface while cleaning.
12. Remove the Sensor Plate by pressing
down on the detent latch located inside
the Sensor Plate mounting Pitch Sensor
13. Moisten a cotton swab with SATO
Thermal Print Head and Platen Cleaner.
14. Clean the Pitch and I-Mark sensors.
15. Reinstall the Sensor Plate by sliding it
back on the shaft.
Cut roller
Pitch Sensor
Sensor Plate
Pitch Sensor
I-Mark Sensor