Section 2: Installation
XL400/410e Operator’s Manual
Page 2-13
2.9 LOADING TAGS AND LABELS (CONT’D)
Lift up the print head by rotating the Head Release Lever to the rear of
the printer. Release the Media Hold Down by pushing and lifting the
lever underneath the green tab marked “PUSH”.
HEAD LOCK LEVER
Load the tags from the rear until the leading edge of the first tag is
underneath the print head. Loosen the Paper Guide Lock Screw and
adjust the Paper Guide until it holds the tag gently against the inside of
the paper path, and positions the sensor assembly). Retighten the
Paper Guide Lock Screw. See page 2-11 for sensor locations.
MEDIA
HOLD-
DOWN
PAPER
GUIDE
PAPER GUIDE LOCK SCREW
SENSOR
LABEL
MEDIA HOLD-DOWN
TAG
HEAD LOCK
LEVER