Section 3: Configuration
Page 3-6
XL400/410e Operator’s Manual
3.3 PRINTER ADJUSTMENTS
The LCD Panel on the XL400e and XL410e is used by the operator when manually entering
printer configuration settings. Many of the settings can also be controlled via software
commands, and in the case of conflict between software and control panel settings, the printer
will always use the last valid setting. If you load a label job that includes software settings and
then enter a new setting via the Operation Panel, the manually set values will be used by the
printer. If you set the values manually and then download a job with software settings, the
software settings will be used.
NORMAL MODE
When the printer is turned on, the ON-LINE LED will be illuminated and the readout should
display the following message:
The LCD Panel will display the ON LINE status on the top line of the display and the bottom line
will contain the label quantity status. The ON LINE message will be changed to OFF LINE
whenever the printer is switched OFF LINE via the START/STOP key.
As soon as a print job is received, the quantity field on the left indicates the number of labels to
be printed. The quantity field on the right indicates the number of labels printed since power up.
As soon as the label job begins to print, the display will indicate the number of labels remaining in
the print job. As each label in the print job is printed, the quantity to be printed (left) will
decrement and the quantity printed (right) will increment.
When the printer is first taken offline by pressing the START/STOP key once. The
ON LINE LED will go off and the display will change to:
on line
000000 000000
center hole tag
000000 000000