SATO CL608e, Service Manual

Page: 35 / 245

Page 2-13
Section 2. Configuration
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
STEP PROCEDURE
1. Use the LINE key to step the underlined cursor to either Yes or No.
2. Once the correct setting is underlined, press the FEED key to accept
the setting and advance to the Auto Online display.
STEP PROCEDURE
1. Use the LINE key to step the underline to either the YES or NO
selection.
2. Once the correct setting is underlined, press the FEED key to accept
the setting and advance the display to the Offset display.
ZERO SLASH
YES NO
This setting determines if a zero is printed with a slash or without a slash. This setting can
also be controlled via software commands. When YES is selected, the printer internal fonts
will have a slash through the center of the zero character.
auto online
YES NO
This setting determines the mode in which the printer powers up. If YES is selected the
printer powers up in the ONLINE mode and is ready to print. If NO is selected, the
printer powers up in the OFFLINE mode and must be manually placed in the ONLINE
mode by pressing the LINE key before it is ready to print.
Zero Slash
AutoOnline
LCD Panel— Advanced Mode
Advanced mode is provided to make adjustments that require only occasional adjustments.
Since they affect the basic operation of the printer, the procedure for entering this mode is
designed to prevent someone from accidentally changing the settings.
To Enter Advanced Mode:
STEP PROCEDURE
1. Press the LINE key while simultaneously turning the power ON .
When the printer emits one long beep, release the LINE key to
display the first screen.
2. Press the FEED key to display the Zero Slash display.
advanced mode
initializing
rom v00.00.00.00