5
Loading and Replacing Battery
①
Use a “+” screwdriver to loosen the screw on the battery compartment.
②
Remove the old battery if replacing the battery.
③
Set a new
9VDC Battery 6F22 (006P)
with correct polarity (+ and -) marked inside the
battery compartment.
④
Close the battery cover and secure it with the screw.
Note
: An alarm setting value or a measurement ambient setting is not reset even if a battery
is removed.
CAUTION
Once the “Low Battery Mark” starts to flash, replace with a new battery immediately.
Under
the “Low Battery Mark” flashing, accurate measurement cannot be expected.
Always use a new battery for replacement.
How to Measure
①
Expose the sensing section by tuning the cover.
②
Turn on the power by pressing the POWER key.
③
Select a measurement mode by pressing the MODE/Up key. The display changes in
following order.
④
Set the instrument far away from your body by holding the lower part of the unit for
accurate measurement or use the instrument fixed onto a camera tripod.
Note
: Measuring conditions such as measurement height differ by purpose of use.
⑤
Press the POWER key to end the measurement.
Note
: Always close the sensing section
for storing.
WBGT(WBGT)
Temperature(TA)
Humidity(RH)
Globe Temperature(TG)