4
⑧
Not applicable
⑨
Sensing Section
Temperature and humidity sensors are inside of this section
⑩
Cover for
Sensing Area
This cover protects sensors from dirt and stains.
Turn the cover to open or close the sensing area.
Be sure to open the cover when measuring.
Keep it closed when not in use.
⑪
Globe
Inside the globe, there is a sensor to measure the radiation heat.
⑫
Battery
compartment
Battery compartment and cover
⑬
Hole for Tripod
Screw hole for securing the unit to a tripod stand.
⑭
Cable Jack
Connect a RS-232C cable to monitor measured data on a PC.
LCD Display
①
7-segment
Display
Display for Temperature
(TA)”, “Globe Temperature (TG), Relative
Humidity (RH) or WBGT Index (WBGT).
Also it displays the set value in alarm setting mode.
②
MIN
Indication for minimum measured value
③
MAX
Indication for maximum measured value
④
WBGT
Indication for WBGT value
⑤
TG
Indication for globe temperature value
⑥
TA
Indication for temperature value
⑦
RH
Indication for relative humidity value
⑧
IN
Indication for indoor values in WBGT mode
⑨
OUT
Indication for outdoor values in WBGT mode
⑩
HOLD
Indication of held data
⑪
Low Battery Mark Indication of low battery. Replace immediately when it blinks.
⑫
%
Unit for humidity value (% rh)
⑬
°C
Unit for temperature, globe temperature and WBGT values