3
Names of Components
Main Unit
①
Display Section
Measured values and state of the main unit are displayed.
* Refer to
“LCD Display” for details
②
POWER
On/Off key
Press this key to turn the main unit on. Press it again to turn off.
③
HOLD
This key holds a measured value.
Press this key to HOLD data. Press the key again to release HOLD.
④
MN/MX/RST
A changeover switch for max. and min. values.
Press this key to display the min. or max. value in the measurement
mode. Press it longer than 2 sec. to reset the values manually.
⑤
SET
Press this key to set an alarm.
In WBGT mode, press longer than 2 sec. to enter the alarm setting
mode. Press the key longer than 2 sec. in alarm setting mode to fix
the set value and return to measurement mode.
⑥
IN/OUT/NEXT
A changeover switch for the setting of indoor and outdoor WBGT.
Press this key longer than 2 sec. in WBGT mode to changeover to
set either indoor (IN) or outdoor (OUT)
In alarm setting mode, press it to change digits
⑦
MODE/UP
A changeover switch for displaying measured values.
In measuring mode, press this key
to switch to “Temperature (TA)”,
“Globe Temperature (TG)”, “Relative Humidity (RH)” or “WBGT
(WBGT)”.
Press at alarm setting mode to increase the setting value.