S
E
TTING
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172
70
Satel Spain
Versión 1.01
}
}
}
Where:
▪
version
: the SenNet API's version (
V1
or
V2
)
▪
datalogger_id
: the MAC address (without colon
“:”).
For example, if the MAC is "D8: 50: 34: C0:
24: 45"
▪
then, it should be used D85034C02445 instead
▪
device_id
: It must be a value between 001 and 100 and it is configurable for each device the
datalogger.
▪
device_type
: The ID associated with the type of device.
▪
device_desc
: Description of the type of device.
▪
device_name
: the name of the device defined by the user (configurable in the datalogger's
interface)
▪
at
: date (timestamp) in UNIX format. You can use a date converter like
▪
Values
: list of captured channels with the channel's ID and the value.
▪
Descriptions
: list of captured channels with the channel's ID and the description
The list of available device types (id / descriptions) and channels (id / descriptions) can be downloaded
from the datalogger's interface. It can be found at:
> Access Data Captured > Channels
Server Response:
If the reception is correct, you should check the server response. Ask:
200 OK
If the answer is:
Response OK
Then, the configuration is correct.
Examples of responses in cases when the connection is not correct are:
▪
Not authorized
▪
Processor error
Version V2
The difference between the V1 and the V2 versions is that the underscore character should be
replaced by a hyphen.
Header:
“
sennet-key
”
instead of
“sennet_key”
Body:
“
datalogger-id
”
instead of
“datalogger_id”
“
device-type
”
instead of
“device_type”
“
device-desc
”
instead of
“device_desc”
“
device-name
”
instead of
“device_name”
Summary of Contents for SENNET DL150
Page 1: ...Dataloggers series Device network DL150 DL151 DL170 DL171 DL172 ...
Page 8: ......
Page 44: ......
Page 86: ......