34 PERFECTA
SATEL
Station 1 only
– the event codes are only sent to station 1.
Station 2 only
– the event codes are only sent to station 2.
Station 1 and Station 2
– the event codes are sent to both stations.
Fig. 17. “Reporting” tab.
9.1.1 Station 1 / Station 2
Reporting format
[738.Format / 758.Format] – format in which event codes are sent to the
monitoring station:
CID – all codes
– event codes are sent in Contact ID format. All events are sent to the
monitoring station.
CID – selected codes
– event codes are sent in Contact ID format. Only selected events
are sent to the monitoring station.
SIA – all codes
– event codes are sent in SIA format. All events are sent to the monitoring
station.
SIA – selected codes
– event codes are sent in SIA format. Only selected events are sent
to the monitoring station.
Panel identifier
[731.Identifiers / 751.Identifiers] [732.SIA prefix / 752.SIA prefix] – identifier
of the control panel for reporting purposes. It allows the monitoring station to determine
from the events are sent. For the Contact ID format, it consists of 4 hexadecimal
characters (digits or letters from A to F). For the SIA format, it consists of 6 hexadecimal
characters (digits or letters from A to F). Additional characters are to be put at the
beginning (to enter them on the keypad, use the 732.SIA prefix / 752.SIA prefix function). If
the identifier only consists of the digits 0, events are not sent.
IP format and protocol
[UDP] [SIA-IP] – for reporting via GPRS, you must define:
– format: SATEL or SIA-IP (SIA DC-09 standard).