中文
EN
DE RU KO PT
JA
ES
7
III. Use and maintenance notes for tools
1
)
The pressure of the compressed air shall not exceed the air pressure indicated in the specification sheets and on the nameplates of
the tools.
2
)
Add 10 drops of lubricant through the air inlet or specified lubricant filling hole before and after each use. Repeat lubricant filling
each time the pneumatic tool is used continuously for more than one hour.
3
)
If an oil mist lubricator is used in the air supply line, the supply amount shall be adjusted to 3 drops per minute.
4
)
Ensure that clean and dry compressed air is used.
5
)
Please use the air treatment FRL
(
filter, relief valve and oil mist lubricator
)
in the air supply line.
6
)
Check whether there is condensate water in the compressor tank or filter every day. If water is there, drain it off.
7
)
Check the oil in the oil mist lubricator every day and replenish if needed.
8
)
Lubricate SATA pneumatic tools with the specified lubricants or greases.
9
)
Use lubricant for specialized pneumatic tools or SEA#5 lubricants in the pneumatic motors and oil mist lubricators. Add the lubricant
through specified filling hole.
10
)
Use molybdenum-based grease for the lubrication of impact and transmission components. Please add the grease through the
specified filling hole.
IV. Notes for connecting the air supply system and pipelines
1
)
Refer to the figure below for how to arrange the compressed air supply line.
2
)
Select an air pipeline based on the recommended inner diameter given in the tool's specification sheet.
3
)
Set the air pressure based on the recommended working pressure given in the tool's specification sheet and adjust the air
pressure with a relief valve.
4
)
The air pipe after the relief valve shall not exceed 3 meters in length as the air pressure at the air inlet of the pneumatic tool will be
reduced if the pipe is too long.
Air regulator
Compressed air pipe
Lubricator
Filter
Summary of Contents for 02312
