Sartorius X3 PR 5410, Operating Manual

Page: 111 / 148

X3 Operating Manual Commissioning
Sartorius 111
4.12.6 Function 8: Diagnosis
Command
Device
address
Function
number
Sub-
function
Any value CRC 16
1 byte 1 byte 2 bytes 2 bytes 2 bytes
Range 1...127 8 0
This function is intended for testing the communication.
Only sub-function 0 is supported.
The received command is sent as a reply.
Command Device
address
Function
number
Sub-
function
Value of the
command
CRC 16
1 byte 1 byte 2 bytes 2 bytes 2 bytes
4.12.7 Function 15: Writing n Successive Bits
Command Device
address
Function
number
Address of
the 1st bit
Number
of bits
Number of
bytes
Value of
bits
CRC 16
1 byte 1 byte 2 bytes 2 bytes 1 byte n bytes 2 bytes
Range 0...127 15 0...127 8,16, 24 1,2,3... / \
1st byte 2nd byte 3rd byte - - - - - - - - - - - Last byte
8th ...
1st
bit
last bit
The bit address must always be the 1st bit of a byte. The number of bits to be read must not be smaller
than 8 and must be a multiple of 8. The address plus the number of bits must not exceed 128.
Example of function 15
Command
1 15 0 64 0 8 1 3 CRC CRC
Reply 1 15 0 64 0 8 CRC CRC
The individual bytes are shown.