manualshive.com logo in svg

Sartorius MA37, Operating Instructions Manual

Share
Download
Sartorius MA37 Operating Instructions Manual Download Page 61

61

Disposal

Operating Instructions Moisture Analyzer MA37

Disposal

The packaging is made of environmentally friendly materials that can be used as 
secondary raw materials . If you no longer require the packaging, you can dispose 
of it free of charge in Germany through the VfW dual system (contract number 
D-59101-2009-1129) . Otherwise you should dispose of the material in accordance 
with the waste disposal regulations that are applicable in your area . The equipment, 
including accessories and batteries, does not belong in your regular household 
waste . The EU legislation requires its Member States to collect electrical and 
electronic equipment and dispose of it separately from other unsorted municipal 
waste with the aim of recycling it . For more information regarding disposal and 
recycling, please contact our local service representatives . Our partners listed on 
the following website will also be able to provide assistance within the EU:

1)  Go to http://www .sartorius .com/de .
2)  Select the “Service” menu item .
3)  Then select “Information on Disposal .”
4)  Addresses for the local Sartorius disposal contacts can be found in the PDF files 

available for download on this page .

 

Sartorius will not take back equipment contaminated with hazardous materials 
(ABC contamination) – either for repair or disposal . 
 

Service Address Disposal:

Please refer to our website (www .sartorius .com) or contact the Sartorius Service 
Center for more detailed information regarding repair service addresses or the 
disposal of your device .

Summary of Contents for MA37






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands