38
Moisture Analysis
Operating Instructions Moisture Analyzer MA37
Printing Out the Analysis Report
If a lab printer is connected, you can print out the result of the moisture analysis .
a
t
Select
a
.
y
The analysis report is printed out .
The settings for the analysis report can be configured in the system settings
(see section “Printout” in Chapter “System Settings”) .
Further information and an example of an analysis report can be found in
Chapter “ISO/GLP-compliant Printout” .
Removing a Sample
Danger of burns due to hot sample pan!
The sample and sample pan may be very hot .
– Do not touch the sample pan .
– Use sample tongs (accessory) to remove the sample .
Remove sample
Remove old sample from sample
chamber.
y
When you have exited the measurement by selecting
OK
, you can remove the
sample from the moisture analyzer .
t
Open the hood .
t
Remove the sample pan from the moisture analyzer using sample tongs .
t
Close the hood .
t
Allow the sample to cool down and dispose of it properly .
and therefore marked with a symbol .
